Details below of a dirty slate floor in the village of Linton near Wetherby. The large 60 x 40cm Slate tiles were laid in a kitchen with grey grout and covered and area of approximately 10-12sqm.
Cleaning Slate Tile Flooring
The dirt was removed from the Slate Floor Tiles using a solution of Tile Doctor Remove & Go mixed with Tile Doctor Nanotech Ultra-Clean agitated with a rotary scrubbing machine fitted with a scrubbing pad. The scrubbing machine isn’t as effective on the grout lines so it was necessary to scrub these by hand using a grout scrubbing brush. The floor was then washed down with water to neutralise it and remove any remaining cleaning solution prior to sealing, it had take all day to clean the floor so we decided to let it dry overnight and come back the next day to seal.
Sealing Slate Tile Flooring
The Slate was sealed with Tile Doctor High Shine Sealer which as the name suggests provides a good combination of stain protection together with a high-sheen finish. If you’re doing this yourself I recommend the use of a paint pad which gives a nice even application, slate needs four to five coats and it’s necessary to let it dry between coats. You can see from the photograph below how the sealer really gave the floor a lift and the home owner was delighted with the results.
